Introduction：【Products Introduction】The FZ-2100 / 2200A uses the Coriolis force principle as a detection method to perform increasingly important fuel flow measurements with high accuracy and response, and continuously measures mass flow with high accu……
The FZ-2100 / 2200A uses the Coriolis force principle as a detection method to perform increasingly important fuel flow measurements with high accuracy and response, and continuously measures mass flow with high accuracy regardless of temperature, pressure or density.
1、 can not be affected by temperature, pressure, density in the case of high-speed response, high-precision continuous measurement
2、 high measurement accuracy: - 40:1, ± 0.1% (reading value)
3、 can measure density
4、 with internal pressure air can be purged housing
The graph above shows the steady flow accuracy and reproducibility when using the FZ-2100 detector.
As can be seen from the graph, the FZ-2100 has a reading accuracy of ±0.1% (2 to 82 kg / h).
Fuel Mass Flow Measurements in 1199 Mode
Red: Fuel flow Blue: Engine
shaft torque
Blue: Engine speed
High frequency vibration test bench 
Direct coupled electric vibration table (water cooled) 
Direct coupled electric vibration table (air-cooled) 
PT721 clamp type AC current probe (1200A, 100kHz) 
PT320 high-frequency AC/DC current probe (60A, 20MHz) 
Waveform generator 33622A 120 MHz 2-channel 
Impedance analyzer E4990A 20 Hz to 10/20/30/50/120 MHz 
Waveform generator 33511B 20 MHz 1 channel with arbitrary waveform generation capability 
Waveform generator 33612A, 80 MHz, 2-channel 
TOP
中
EN
Current location：
