Introduction：G series flowmeter consists of G series mass flow sensor and IPT100 type transmitter matching composition, accuracy class 0.5 grade Coriolis mass flowmeter.
1、Double V-shaped flow tube design, improve the working frequency, reduce the low frequency band of external vibration impact, reduce the installation volume
2, a wealth of receiving material: C-22, 316L, can be applied to corrosive media occasions
3、Higher pressure resistance level, grade high pressure 10MPa
4、No flow blocking elements and larger flow through the passage, reducing the pressure loss, reducing energy consumption and waste.
5、Complete integrated design, completely abandon the troubles of cumbersome wiring, causing failures, saving installation costs.
6, rich calibre, can be directly strung into the pipeline to provide density measurement; can also be used to measure the density of bypass self-emptying installation. Because of this installation can adjust the flow rate, reduce wear and tear, so that the density of liquids and slurries containing solid particles can be measured.
7, cost-effective so that it can be directly used in the use of volumetric tables or densitometers applications
G series flowmeter consists of G series mass flow sensor and IPT100 type transmitter matching composition, accuracy class 0.5 grade Coriolis mass flowmeter.
G15, G25, G50, G80.
High frequency vibration test bench 
Direct coupled electric vibration table (water cooled) 
Direct coupled electric vibration table (air-cooled) 
PT721 clamp type AC current probe (1200A, 100kHz) 
PT320 high-frequency AC/DC current probe (60A, 20MHz) 
Waveform generator 33622A 120 MHz 2-channel 
Impedance analyzer E4990A 20 Hz to 10/20/30/50/120 MHz 
Waveform generator 33511B 20 MHz 1 channel with arbitrary waveform generation capability 
Waveform generator 33612A, 80 MHz, 2-channel 
TOP
中
EN
Current location：
