Introduction：The main feature of the KF series of gear oil pumps is the variety of models, which can be combined in any way according to the modular design principle and can also be expanded in the future.
1、Motor power：2.2KW/4P
2、Oil pump cast iron GG25 material, single FKM lip seal, with safety valve (users can adjust the safety valve pressure setting on site 0-15Bar).
3、Scope of supply: pump head + bell-shaped cover + coupling + Shanghai ABB motor + paired flange;
4、Import and export and rotating direction: standing on the motor side towards the pump end, left in and right out, clockwise rotation, import and export SAE1.5.
5、Shanghai ABB standard click M2BAX parameters: 2.2KW/1450RPM/380V/50HZ/3PH/IP55/IE2/B35
6、 flow Q = 50L/min; P = 4Bar, the outlet pressure increases, the motor configuration requirements change.
7、 before starting the system will be cleaned up in the pipeline magazines, pump inlet before pretending to filter, to avoid damage caused by foreign objects into the pump; oil pumps in the case of export closure is strictly prohibited to start running.
High frequency vibration test bench 
Direct coupled electric vibration table (water cooled) 
Direct coupled electric vibration table (air-cooled) 
PT721 clamp type AC current probe (1200A, 100kHz) 
PT320 high-frequency AC/DC current probe (60A, 20MHz) 
Waveform generator 33622A 120 MHz 2-channel 
Impedance analyzer E4990A 20 Hz to 10/20/30/50/120 MHz 
Waveform generator 33511B 20 MHz 1 channel with arbitrary waveform generation capability 
Waveform generator 33612A, 80 MHz, 2-channel 
TOP
中
EN
Current location：
