Introduction：N2782B AC/DC Power Probe, 50 MHz, 30 Arms, Performs Accurate Measurements Using Hybrid Technology Including Hall Effect Sensor and AC Current Transformer.
The N2782B current probe is a reliable solution for measuring AC and DC currents. Using a hybrid technology that includes a Hall effect sensor and an AC current transformer, the probe can * measure up to 30 arms of DC or AC current.
The current probe has a flat frequency response, low noise, and low insertion loss, making it an ideal choice for steady-state or transient current measurement driven by motors, such as switching power supplies, inverters, controllers, disk drives, LCD displays, electronic ballasts, and current amplifiers that drive inductive loads.
1. Used with any Keysight oscilloscope with high impedance BNC input: 10002000 X -, 3000 X -, 4000 X -, 5000, 6000, 7000, 8000, and 9000 series (using E2697A and 90000A series and N5449A and 90000X series)
2. Achieve flat bandwidth - DC to 50 MHz, * high current 30 arm
3. Achieve superior 1% accuracy and high signal-to-noise ratio
4. Prevention of probe damage and overload protection function
5. High impedance BNC input directly connected to the oscilloscope
6. Use the "demagnetization" button to eliminate any residual magnetism accumulated in the magnetic core
7. Connect up to three N278xBs to a single power supply N2779A using an external power supply
High frequency vibration test bench 
Direct coupled electric vibration table (water cooled) 
Direct coupled electric vibration table (air-cooled) 
PT721 clamp type AC current probe (1200A, 100kHz) 
PT320 high-frequency AC/DC current probe (60A, 20MHz) 
Waveform generator 33622A 120 MHz 2-channel 
Impedance analyzer E4990A 20 Hz to 10/20/30/50/120 MHz 
Waveform generator 33511B 20 MHz 1 channel with arbitrary waveform generation capability 
Waveform generator 33612A, 80 MHz, 2-channel 
TOP
中
EN
Current location：
