Introduction：The flowmeter can be installed with different probes for external clamp, pipe section, and plug-in installation; Similarly, combining different sensors (probes) can also achieve measurement of multiple pipe diameters. Of course, with sensors……
Medium clamp mounted sensor, pipe diameter DN300, carbon steel material, nominal pressure 1.0MPa, 4-20mA output, no signal input, distance from the host to the sensor 5 meters, heat measurement function, equipped with pressure mounted plug-in temperature sensor.
1. Good protection performance: IP68 protection level, spray water will not enter the shell, and can be immersed in water for a short time;
2. Exquisite body: Made of imported engineering plastic material, with high shell strength;
3. Weathering resistance: After high and low temperatures, the shell does not deform and the strength remains unchanged;
4. High reliability, wide measurement range, strong anti-interference ability, and heat measurement.
Widely used in water, heating, water conservancy, metallurgy, chemical industry, machinery, energy and other industries. Can be used as production testing, flow calibration, temporary testing, flow inspection, water meter cross debugging energy-saving testing, is the flow of timely detection of the necessary tools and instruments.
High frequency vibration test bench 
Direct coupled electric vibration table (water cooled) 
Direct coupled electric vibration table (air-cooled) 
PT721 clamp type AC current probe (1200A, 100kHz) 
PT320 high-frequency AC/DC current probe (60A, 20MHz) 
Waveform generator 33622A 120 MHz 2-channel 
Impedance analyzer E4990A 20 Hz to 10/20/30/50/120 MHz 
Waveform generator 33511B 20 MHz 1 channel with arbitrary waveform generation capability 
Waveform generator 33612A, 80 MHz, 2-channel 
TOP
中
EN
Current location：
