Introduction：Combustion Analyser
IndiModul 623
IndiMicroTM 602
Combustion analyser is an instrument for analysing the combustion condition in the cylinder of internal combustion engine, which can collect the relevant data of the internal combustion engine in real time with high speed and accuracy, and generate P-φ power diagram by data post-processing, and then calculate the rate of pressure increase in the cylinder, the exothermic rate of fuel combustion, the average temperature of the cylinder with the P-φ diagram, which is an effective tool for the study of combustion of internal combustion engine. AVL List GmbH is a high-tech company with high reputation in the world automotive and engine industry, and its combustion analysers have a wide range of applications and technology representation in the industry.
Provides raw data collection and also enables on-line and below real-time calculation capability:
- Minimum and maximum values
- Maximum slope
- Indication efficiency (low and high)
- Misfire judgement
- Exothermic curve and percentage of mass burned in the cylinder
- Edge detection, timing (injection, ignition)
- Combustion noise
- Filter function
- Graphical formula editor function. Definition of combustion and injection system analysis formulas by means of a graphical formula editor, definition of formulas for combustion processes, time and corner positions of measured signals, thermal results, algorithmic functions, grading and classification of results, display of curve averages and envelopes, numerical statistics, frequency Fourier transforms and order analyses, digital filtering, torsional vibration analyses, combustion noise analyses, etc.
- Real-time oscilloscope mode and single measurement, multi-channel digital voltmeter function
- Event monitoring and unlimited time measurement capability
- Cold start measurements
- Event-triggered measurements, pre- and post-condition recording
- Individual measurement resolution and display windows for channels
- PUMA connection: remote control by AVL PUMA system
High frequency vibration test bench 
Direct coupled electric vibration table (water cooled) 
Direct coupled electric vibration table (air-cooled) 
PT721 clamp type AC current probe (1200A, 100kHz) 
PT320 high-frequency AC/DC current probe (60A, 20MHz) 
Waveform generator 33622A 120 MHz 2-channel 
Impedance analyzer E4990A 20 Hz to 10/20/30/50/120 MHz 
Waveform generator 33511B 20 MHz 1 channel with arbitrary waveform generation capability 
Waveform generator 33612A, 80 MHz, 2-channel 
TOP
中
EN
Current location：
