【Specifications Parameters】

*1 NPN open-pole output rating: 50 mA max. (40 V max.), residual voltage: 0.5 V max.

PNP open-pole output rating: 50 mA max. (30 V max.), residual voltage: 0.5 V max.

Volt-free input quota: On voltage: max. 1 V, Off current: max. 0.6 mA

Voltage input rating: Maximum input rating: 26.4 V, on voltage: 10.2 V max, off current: 0.6 mA max.

Some of the internal input/output circuits of the LK-G5000 series are the same. Please note that potential differences between cables/external devices do not result in potential differences at the same internal terminals. For details, refer to "Wiring Precautions" in the User's Manual.

 

*2 NPN open-pole output rating: 50 mA max. (40 V max.), residual voltage: 0.5 V max.

PNP open-pole output quota: 50 mA max. (30 V max.), residual voltage: 0.5 V max.

Voltage input quota: On voltage: max. 1 V, Off current: max. 0.6 mA

Voltage input rating: Maximum input rating: 26.4 V, on voltage: 10.2 V max, off current: 0.6 mA max.

Some of the internal input/output circuits of the LK-G5000 series are the same. Please note that potential differences between cables/external devices do not result in potential differences at the same internal terminals. For details, refer to "Wiring Precautions" in the User's Manual. This input can be applied to all integrated output ports.

 

*3 NPN open-pole output rating: 50 mA max. (40 V max.), residual voltage: 0.5 V max.

PNP open-pole output rating: 50 mA max. (30 V max.), residual voltage: 0.5 V max.

Voltage input quota: On voltage: max. 1 V, Off current: max. 0.6 mA

Voltage input rating: Maximum input rating: 26.4 V, on voltage: 10.2 V max, off current: 0.6 mA max.

Some of the internal input/output circuits of the LK-G5000 series are the same. Please note that potential differences between cables/external devices do not result in potential differences at the same internal terminals. For details, refer to "Wiring Precautions" in the User's Manual. When a Class 3B laser sensor head is connected, the key-operated switch must be used as this terminal input. Laser light is emitted only when the key switch is set to ON. (Select a key that can be cancelled only when the key operation switch is set to OFF.)

When a Class 2/3R Laser Sensor Head is connected, the laser turns on when the terminal is turned on and turns off when the terminal is short-circuited.

 

*4 When a PC supporting USB 1.1 or USB 2.0 Full speed is connected, the data refresh cycle and other operations may be slowed down.

 

*5 The Ethernet connection can only be made one-to-one with a personal computer or a local connection, including the connection between a personal computer and an LK-G5000 series module only.

 

*6 The EtherNet/IP® interface cannot be used when a CC-Link Unit or DeviceNet® Unit is installed; EtherNet/IP® supports the latest controllers.