Introduction：HY-CYT torque sensor is developed on the basis of strain bridge proprietary technology, specialised in the measurement of torque, speed parameters of the sensor.
HY-CYT torque sensor is developed on the basis of strain bridge proprietary technology, specially used for measuring torque, speed parameters of the sensor. This series of torque sensor adopts the strain bridge electrical measurement technology, with a set of toroidal transformer non-contact to provide power supply, with micro-power consumption signal coupler instead of the toroidal transformer for non-contact signal transmission, effectively overcoming the high harmonic self-interference brought about by the inductively coupled signals and energy toroidal transformer on the signal toroidal transformer of mutual interference, at the same time will be the output of the sharp pulses into a square-wave signals, so that this series of torque sensor can be long time, high speed operation. Therefore, this series of torque sensors can be operated for a long time and at high speed. This series of torque sensors can be used for both static and dynamic measurements, a variety of mounting forms designed to bring great convenience to the user.
1、Both static torque and rotating torque can be measured;
2、high detection accuracy, good stability, strong anti-interference;
3、small size, light weight, easy to install;
4、It can continuously measure forward and reverse torque without repeated zero adjustment;
5、there is no collector ring and other wear parts, can be a long time running at high speed;
6、strain elastomer strength, can withstand 150% load;
7、strong anti-interference, can be installed in any position, any direction;
8、the sensor part can be used independently from the secondary instrument, directly with the measurement board, PLC or DCS to form a torque measurement device.
1、Detection of electric motors, internal combustion engines and other rotating power equipment, output torque and power;
2、Detection of electric motors, wind power, pumps, mixers, reducers, transmissions, winches, propellers, drilling machinery and other equipment, load torque and input power;
3、Detect a variety of machining centres, automatic machine tools in the working process of the torque;
4、Detect the torque and efficiency transmitted by various rotating power equipment systems;
5、Detecting torque at the same time can detect the speed, shaft power;
6、Can be used to manufacture viscometer, electric, pneumatic, hydraulic torque wrench;
High frequency vibration test bench 
Direct coupled electric vibration table (water cooled) 
Direct coupled electric vibration table (air-cooled) 
PT721 clamp type AC current probe (1200A, 100kHz) 
PT320 high-frequency AC/DC current probe (60A, 20MHz) 
Waveform generator 33622A 120 MHz 2-channel 
Impedance analyzer E4990A 20 Hz to 10/20/30/50/120 MHz 
Waveform generator 33511B 20 MHz 1 channel with arbitrary waveform generation capability 
Waveform generator 33612A, 80 MHz, 2-channel 
TOP
中
EN
Current location：
